How To Cut Perspex. Use a straight edge or a ruler to mark a straight line on the sheet of plexiglass. Cut in a straight line by deeply scribing one surface several times with a sharp metal scriber, clamping the sheet with the scribed line uppermost and pressing sharply down over the edge of a bench.
Turn over the plexiglass and score the opposite side in a similar way. Sawing or scoring a nice clean cut. There are traditionally two methods for cutting plexiglass.
Turn Over The Plexiglass And Score The Opposite Side In A Similar Way.
Thicknesses of acrylic and perspex vary from 1.5mm to over 25mm. However, you can't use the floor, as you need an edge to break the acrylic over later. Acrylic and perspex can be used in a number of ways from bath and basin splashbacks to, in a thicker form, shelves.
There Is The Utility Knife (Or Box Cutter, Glass Cutter, Etc.) And There Is The Circular Saw (Or Saber Saw, Table Saw, Or Jigsaw).
Cutting with a hand saw: Use a straight edge or a ruler to mark a straight line on the sheet of plexiglass. At last, hold the scribed line to the edge of your work surface, and put the plexiglass in place with the help of a clamp.
Then, With Sharp Downward Pressure, Cut Off The Extra Portion Of Plexiglass Going Beyond Your Work Surface.
Push it along the marked line at a uniform pace to make a nice and tidy cut. You can cut a straight edge with a jigsaw, or opt for a more freehand curve if you want to create a circular piece of plastic. You can also use a handheld or cnc router to cut acrylic sheets.
Measure And Mark The Area You Need To Cut With A Permanent Marker And A Yardstick.
Most people prefer to cut acrylic using a hand saw. What is the best tool to cut perspex with? Clamp into the place and put on your safety goggles in case any plastic particles are dislodged during the cutting process.
To Make It Easier To Work With, Find A Flat Surface Big Enough To Accommodate Your Plastic Sheet.
How to cut acrylic sheet. First, you need to put the sheet on the table to easily measure it. Cutting acrylic is a simple process but whichever method you use you need a saw with fine teeth.
Post a Comment for "How To Cut Perspex"